Taurus R22 Residential Ducted Split Units
LOW RISE BUILDINGS
Johnson Controls YORK® Taurus High and Low Static Ducted Split Air Conditioners consist of ceiling suspended, indoor concealed ducted fan coil units and outdoor condensing units. This range of ducted splits from Johnson Controls offers the perfect combination of superior product quality, operating efficiency and value for money.
Taurus Residential Ducted Split Units with rotary type compressors for Low Rise Buildings are suitable for installations where:
- The maximum equivalent piping length between the indoor unit and outdoor unit does not exceed 15 meters.
- The maximum vertical height difference between the indoor unit and outdoor unit does not exceed 5 meters.
FEATURES - CONDENSING UNITS
Condensing units are designed for operation with R 22 and are LVD (Low Voltage Directive) certified. Taurus condensing units are available in side and top discharge configurations for a nominal capacity range from 12,000 to 42,000 Btuh. Units are shipped with a charge of R22 sufficient for 15 feet of refrigerant piping.
All compressors are rotary type and have internal overload protection while large capacity compressors (model with nominal capacity 42,000 Btuh) have high and low pressure cutouts for additional compressor safety.
Unit casing is constructed of zinc coated, heavy gauge, galvanized steel. Exterior surfaces are thoroughly cleaned, phosphatized, and finished with weather resistant, baked enamel. Load bearing panels are adequately strengthened for maximum reliability.
Condenser coils are of staggered construction made from heavy wall seamless copper tubes mechanically bonded to aluminium fins. Each coil is factory pressure tested to 450 psig to detect any leaks. Condensers are suitably protected to prevent damage at site during handling and installation.
Condenser Fans & Motors
Condenser fans are of axial type with statically and dynamically balanced blades, directly driven by a single phase electric motor ensuring quiet operation. The fan motors are of permanently lubricated type with internal thermal protection as standard. All shafts are protected against rusting. The fan motors used are permanent split capacitor type for high efficiency.
All condensing units have factory assembled contactors, relays and terminal blocks for easy wiring during installation. Contactors are standard for 30,000 to 42,000 Btuh models only.
FEATURES - FAN COIL UNITS
Fan coil units are suitable for ceiling suspended installation. Low static models are blow through type while high static models from size 30,000 to 36,000 Btuh, are of blow through type. Unit size 42,000 Btuh is again of draw through configuration. All fan coil units are suitable for indoor concealed ducted installation. All indoor units are factory assembled including coil, condensate drain pan, fan motor(s), filters and controls in an insulated casing.
All units are tested and rated in accordance with ASHRAE standards.
Unit casing is constructed of zinc coated, heavy gauge galvanized steel. The exterior surfaces are thoroughly cleaned, phosphatized, and finished with a weather resistant, baked enamel finish. All panels in the unit casing are insulated with permanent fire retardant odorless material. Knockouts are provided for electrical power and refrigerant piping connections. Panels are fastened with screws for ease of service and cleaning.
Evaporator coils are constructed of copper tube and aluminum fins. Aluminum fins are bonded to copper tubing and factory pressure leak tested at 450 psig. Coils are arranged for draw through or blow through applications. The condensate drain pan is constructed of powder coated GI.
Evaporator Fans & Motors
Evaporator fans are of double inlet, double width, forward curved, centrifugal type with direct drive motor as standard. They are statically and dynamically balanced for quiet operation. The fan motors are of permanently lubricated type with internal thermal protection as standard. The shaft is protected against rusting. All fan motors are resilient mounted to minimize vibration and noise and are of permanent split capacitor type for high efficiency.
Wired microprocessor based controls are standard, while additional wireless remote controls are also available. The controls provide for compressor delay protection, indoor anti-icing, 3 speed fan control, temperature setting and auto fan function.
All units are provided with filters that are easily accessible from the rear of the unit. Filters are fabricated from washable synthetic media. Aluminium filters of thickness 19 mm are available as an option.